diff --git a/developpement_electronique/t36hostjoystick_Microphone/t36hostjoystick_Microphone.ino b/developpement_electronique/t36hostjoystick_Microphone/t36hostjoystick_Microphone.ino
new file mode 100644
index 0000000..a9465ec
--- /dev/null
+++ b/developpement_electronique/t36hostjoystick_Microphone/t36hostjoystick_Microphone.ino
@@ -0,0 +1,75 @@
+// Joystick Logitec extreme3Dpro to teensy3.6 avec Mic PDM
+#include <Audio.h>
+#include <Wire.h>
+#include <SPI.h>
+#include <SD.h>
+#include <SerialFlash.h>
+
+// GUItool: begin automatically generated code
+AudioInputPDM            pdm1;           //xy=218.88888888888889,241.11111111111111
+AudioEffectGranular      granular1;      //xy=372.22216796875,159.9999542236328
+AudioEffectBitcrusher    bitcrusher1;    //xy=543.3333129882812,161.11109924316406
+AudioOutputAnalogStereo  dacs1;          //xy=685.888916015625,246.88890075683594
+AudioConnection          patchCord1(pdm1, granular1);
+AudioConnection          patchCord2(granular1, bitcrusher1);
+AudioConnection          patchCord3(bitcrusher1, 0, dacs1, 0);
+AudioConnection          patchCord4(bitcrusher1, 0, dacs1, 1);
+// GUItool: end automatically generated code
+
+#define GRANULAR_MEMORY_SIZE 25600  // 12800 enough for 290 ms at 44.1 kHz
+int16_t granularMemory[GRANULAR_MEMORY_SIZE];
+#include "USBHost_t36.h"
+USBHost             usbHost1;
+USBHIDParser        usbHid1( usbHost1 );
+JoystickController  stick( usbHost1 );
+
+bool freeze = 0;
+
+void setup( ) {
+  AudioMemory(40);
+  usbHost1.begin();
+  bitcrusher1.bits(16); /////////////////
+  bitcrusher1.sampleRate(44100);
+  granular1.begin(granularMemory, GRANULAR_MEMORY_SIZE);
+  //granular1.beginPitchShift(25);
+}
+
+void loop() {
+  usbHost1.Task();
+
+  int Xjoy = stick.getAxis( 0 );
+  int Yjoy = stick.getAxis( 1 );
+  int Zjoy = stick.getAxis( 5 );
+  int Cross = stick.getAxis( 9 );
+  uint32_t buttons = stick.getButtons();
+ 
+   if (buttons > 1) {
+      byte bitc = buttons;
+      bitcrusher1.bits(bitc);
+    }
+    else  bitcrusher1.bits(16);
+
+    long SR =  sq(1023 - Yjoy)/24;
+    Serial.print(SR);  Serial.println();
+    bitcrusher1.sampleRate(SR);
+  //granular1.beginPitchShift(10);
+   if (buttons==1 && freeze == 0) {
+    freeze=1;
+    float msec = 10+(1023-Xjoy)/2;//500.0; // + (knobA3 * 190.0);
+    granular1.beginFreeze(msec);
+  }
+  if(buttons ==0 ){
+    freeze=0;
+    granular1.stop();
+  }
+    float ratio;
+    if(Zjoy>=0 && Zjoy<32) ratio = 0.25;
+     if(Zjoy>=32 && Zjoy<96) ratio = 0.5;
+      if(Zjoy>=96 && Zjoy<160) ratio = 1.0;
+       if(Zjoy>=160 && Zjoy<224) ratio = 2.0;
+        if(Zjoy>=224 && Zjoy<256) ratio = 4.0;
+    //ratio = powf(2.0, (Zjoy)/255.0 * 2.0 - 1.0); // 0.5 to 2.0
+    //ratio = powf(2.0, knobA2 * 6.0 - 3.0); // 0.125 to 8.0 -- uncomment for far too much range!
+    granular1.setSpeed(ratio);
+delay(10);
+}