diff --git a/code/Feu_tricolor_v1.ino b/code/Feu_tricolor_v1.ino
index e65d16d..f3ff083 100644
--- a/code/Feu_tricolor_v1.ino
+++ b/code/Feu_tricolor_v1.ino
@@ -1,86 +1,89 @@
-#include <FastLED.h>
-#include "avdweb_Switch.h"
-#define LED_PIN 3
-#define NUM_LEDS 88
-
-
-
-CRGB leds[NUM_LEDS];
-
-int button1pin=0; // Déclarations des pins des boutons.
-int button2pin=1;
-int button3pin=2;
-int button1State = 0; // Give pushbutton a value 
-int button2State = 0; // Give pushbutton a value 
-int button3State = 0; // Give pushbutton a value
-
-
-void setup() {
-  Serial.begin(9600);
-  
-    pinMode(button1pin, INPUT);    // configure la broche 7 en ENTREE
-    pinMode(button2pin, INPUT);    // configure la broche 7 en ENTREE
-    pinMode(button3pin, INPUT);    // configure la broche 7 en ENTREE
-    digitalWrite(button1pin, LOW);
-    digitalWrite(button2pin, LOW);
-    digitalWrite(button2pin, LOW);
-    
-  FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS);
-  FastLED.setMaxPowerInVoltsAndMilliamps(5, 500);
-  FastLED.clear();
-  FastLED.show();
-  
-}
-
-void loop() {
-  button1State = digitalRead(button1pin);
-  button2State = digitalRead(button2pin);
-  button3State = digitalRead(button3pin);
-  if(button1State == HIGH) {
-    FastLED.clear();
-    for (int i=0; i < 6; i++) { 
- leds[i] = CRGB(255,0,0);}
-    for (int j=8; j < 14; j++) { 
- leds[j] = CRGB(0,0,0);}
-    for (int k=16; k < 38; k++) { 
- leds[k] = CRGB(0,0,0);}
- for (int l=38; l < 50; l++) { 
- leds[l] = CRGB(255,0,0);}
- for (int m=50; m < 82; m++) { 
- leds[m] = CRGB(0,0,0);}
-for (int n=82; n < 88; n++) { 
- leds[n] = CRGB(255,0,0);}
- FastLED.show();
-  }
-  if(button2State == HIGH) {
-    FastLED.clear();
-    Serial.print("button 2 appuyé ");
-    for (int i=0; i < 6; i++) { 
- leds[i] = CRGB::Black;}
-    for (int j=8; j < 14; j++) { 
- leds[j] = CRGB::Orange;}
-    for (int k=14; k < 18; k++) { 
- leds[k] = CRGB(0,0,0);}
- for (int l=30; l < 36; l++) { 
- leds[l] = CRGB::Orange;}
-  for (int m=52; m < 58; m++) { 
- leds[m] = CRGB::Orange;}
-for (int n=74; n < 80; n++) { 
- leds[n] = CRGB::Orange;}
- FastLED.show();
- delay(500);
- for (int o=0; o < 88 ; o++) { 
- leds[o] = CRGB::Black;}
-  FastLED.show();
- delay(500);
-  }
-   if(button3State == HIGH) {
-    FastLED.clear();
-    Serial.print("button 3 appuyé ");
-    for (int p=16; p < 28; p++) { 
- leds[p] = CRGB::Green;}
- for (int q=60; q < 72; q++) { 
- leds[q] = CRGB::Green;}
- FastLED.show();
-  }
-}
+#include <FastLED.h>
+#include "avdweb_Switch.h"
+#define LED_PIN 3
+#define NUM_LEDS 88
+
+
+
+CRGB leds[NUM_LEDS];
+
+// Déclarations des pins des boutons.
+int button1pin=0; 
+int button2pin=1;
+int button3pin=2;
+
+int button1State = 0; 
+int button2State = 0; 
+int button3State = 0; 
+
+
+void setup() {
+  Serial.begin(9600);
+  
+    pinMode(button1pin, INPUT);    // configure la broche 0 en ENTREE
+    pinMode(button2pin, INPUT);    // configure la broche 1 en ENTREE
+    pinMode(button3pin, INPUT);    // configure la broche 2 en ENTREE
+    digitalWrite(button1pin, LOW);
+    digitalWrite(button2pin, LOW);
+    digitalWrite(button2pin, LOW);
+    
+  FastLED.addLeds<WS2812, LED_PIN, GRB>(leds, NUM_LEDS);
+  FastLED.setMaxPowerInVoltsAndMilliamps(5, 500);
+  FastLED.clear();
+  FastLED.show();
+  
+}
+
+void loop() {
+  button1State = digitalRead(button1pin);
+  button2State = digitalRead(button2pin);
+  button3State = digitalRead(button3pin);
+  // Si le bouton 1 est appuyé alors la partie du bas s'allume en rouge
+  if(button1State == HIGH) {
+    FastLED.clear();
+    for (int i=0; i < 6; i++) { 
+ leds[i] = CRGB(255,0,0);}
+    for (int j=8; j < 14; j++) { 
+ leds[j] = CRGB(0,0,0);}
+    for (int k=16; k < 38; k++) { 
+ leds[k] = CRGB(0,0,0);}
+ for (int l=38; l < 50; l++) { 
+ leds[l] = CRGB(255,0,0);}
+ for (int m=50; m < 82; m++) { 
+ leds[m] = CRGB(0,0,0);}
+for (int n=82; n < 88; n++) { 
+ leds[n] = CRGB(255,0,0);}
+ FastLED.show();
+  }
+  if(button2State == HIGH) { // Si le bouton 2 est appuyé, le milieu s'allume en orange clignottant
+    FastLED.clear();
+    Serial.print("button 2 appuyé ");
+    for (int i=0; i < 6; i++) { 
+ leds[i] = CRGB::Black;}
+    for (int j=8; j < 14; j++) { 
+ leds[j] = CRGB::Orange;}
+    for (int k=14; k < 18; k++) { 
+ leds[k] = CRGB(0,0,0);}
+ for (int l=30; l < 36; l++) { 
+ leds[l] = CRGB::Orange;}
+  for (int m=52; m < 58; m++) { 
+ leds[m] = CRGB::Orange;}
+for (int n=74; n < 80; n++) { 
+ leds[n] = CRGB::Orange;}
+ FastLED.show();
+ delay(500);
+ for (int o=0; o < 88 ; o++) { 
+ leds[o] = CRGB::Black;}
+  FastLED.show();
+ delay(500);
+  }
+   if(button3State == HIGH) { // Si le bouton 3 est appuyé, le haut s'allume en vert
+    FastLED.clear();
+    Serial.print("button 3 appuyé ");
+    for (int p=16; p < 28; p++) { 
+ leds[p] = CRGB::Green;}
+ for (int q=60; q < 72; q++) { 
+ leds[q] = CRGB::Green;}
+ FastLED.show();
+  }
+}